LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lubrication - Lancer Evolution) >> Oil Pump >> Removal And Installation >> Removal Service Point >> << A >> Engine Oil Pump Sprocket Center Bolt Removal

<< A >> Engine Oil Pump Sprocket Center Bolt Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the engine oil pump sprocket and the engine oil pump drive chain with tie-wrap to prevent slippage between the engine oil pump sprocket and the engine oil pump drive chain.
  2. Hold the engine oil pump sprocket with special tool MB991346.
  3. Remove the engine oil pump sprocket with the engine oil pump drive chain attached.
    Fig 1: Identifying Tie-Wrap And Special Tool (MB991346)
    G05392687Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals