LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake & Exhaust System - Lancer >> On-Vehicle Service >> Turbocharger WASTEGATE Solenoid Check >> A Operation check

A Operation check

  1. Install the hand vacuum pump to the nipple "A" of solenoid.
  2. Use the jumper wire to connect the solenoid terminal with the battery terminal.
  3. Disconnecting the jumper wire at the negative (-) battery side, apply the vacuum pressure. Check the airtightness.
    Jumper wire Nipple "B" state Normal state
    Connected Opened Negative pressure leaks
    Closed Negative pressure maintained
    Disconnected Opened Negative pressure maintained
    Fig 1: Locating Turbocharger Wastegate Solenoid
    G05903567Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Checking Solenoid Operation
    G05393661Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals