Inspection Procedure 1: Exhaust Leakage: Diagnosis
- STEP 1. Start the engine. Have an assistant stay in the driver's seat. Raise the vehicle on a hoist. Have the assistant rev the engine while searching for exhaust leaks.
Q: Is the exhaust leaking?
- YES: Go to Step 2.
- NO: The procedure is complete.
- STEP 2. Check the gasket for cracks, damage.
Q: Is the gasket damaged?
- YES: Replace the gasket (Refer to EXHAUST MANIFOLD < 2.0L ENGINE Non-turbo, 2.4L ENGINE > or EXHAUST PIPE AND MAIN MUFFLER < 2.0L ENGINE Non-turbo, 2.4L ENGINE > ). Then go to Step 4.
- NO: Go to Step 3.
- STEP 3. Check for loosening in each coupling section.
Q: Is there any loosening in any section?
- YES: Tighten the loosening section (Refer to EXHAUST MANIFOLD < 2.0L ENGINE Non-turbo, 2.4L ENGINE > or EXHAUST PIPE AND MAIN MUFFLER < 2.0L ENGINE Non-turbo, 2.4L ENGINE > ). Then go to Step 4.
- NO: There is no action to be taken.
- STEP 4. Start the engine. Have an assistant stay in the driver's seat. Raise the vehicle on a hoist. Have the assistant rev the engine while searching for exhaust leaks.
Q: Is the exhaust leaking?
- YES: Return to Step 2.
- NO: The procedure is complete.