LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake & Exhaust System - Lancer >> EXHAUST MANIFOLD - 2.0L ENGINE Non-turbo, 2.4L ENGINE >> Removal And Installation >> Installation Service Points >> >> B << Exhaust Manifold Bracket Installation

>> B << Exhaust Manifold Bracket Installation

  1. Temporarily tighten the exhaust manifold bracket with mounting bolts.
  2. Make sure that the exhaust manifold bracket is closely contacted with the installation surface of each part.
  3. Tighten the mounting bolts to the specified torque.

    Tightening torque: 

    M8: 20 ± 5 N.m (15 ± 3 ft-lb) 

    M10: 41 ± 10 N.m (30 ± 7 ft-lb) 

    Fig 1: Locating Exhaust Manifold Bracket Mounting Bolts
    G08290634Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals