LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Lancer >> Thermostat >> Removal And Installation - 2.0L Engine Turbo >> Installation Service Points >> >> A << Thermostat Installation

>> A << Thermostat Installation

CAUTION: Make absolutely sure that no oil adheres to the rubber ring of the thermostat. Also do not fold or scratch the rubber ring during installation.

Install the thermostat so that the jiggle valve is facing straight up. Be careful not to fold or scratch the rubber ring.

Fig 1: Identifying Thermostat Jiggle Valve And Rubber Ring
G07029137Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals