LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - Lancer >> Charging System >> Disassembly And Assembly >> Reassembly Service Points >> >> C << Front Bracket Assembly Installation

>> C << Front Bracket Assembly Installation

Remove the brush holding wire after the rotor has been installed.

Fig 1: Locating Regulator Assembly Wire Through Hole
G05393711Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals