DTC C1395: Brake fluid filling not completed: Diagnosis

Required Special Tools: 

• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
  • MB991824: Vehicle Communication Interface (V.C.I.)
  • MB991827: M.U.T.-III USB Cable
  • MB991910: M.U.T.-III Main Harness A

1. STEP 1. Using scan tool MB991958, diagnose the CAN bus lines. 

   Use scan tool to diagnose the CAN bus lines.

   Q: Is the check result normal? 

   1. YES:  Go to Step 2.
   2. NO:  Repair the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ). On completion, go to Step 2.
2. STEP 2. Check whether the DTC is reset. 

   Erase the DTC.

   Q: Is DTC C1395 set? 

   1. YES:  Replace the hydraulic unit (integrated with ASC-ECU) (Refer to HYDRAULIC UNIT  ).
   2. NO:  The procedure is complete.