<< A >> Parking Brake Rear Cable Disconnection

Disconnect the parking brake rear cable according to the procedure below.

1. Release the parking brake, and loosen the adjusting nut.
2. Remove the floor console bracket rear mounting bolts.
   Fig 1: Locating Floor Console Bracket Rear Mounting Nut And Bolt

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
3. Slide the floor console bracket rear, and disconnect the parking brake rear cable from the hole shown by the arrows in the illustrations.
   Fig 2: Locating Floor Console Bracket Rear

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.