LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Basic Brake System - Lancer >> On-Vehicle Service >> BRAKE LINING AND BRAKE DRUM CONTACT CHECK < Vehicles with rear drum brake >

BRAKE LINING AND BRAKE DRUM CONTACT CHECK < Vehicles with rear drum brake >

  1. Remove the brake drum.
  2. Remove the shoe and lining assembly (Refer to REAR DRUM BRAKE  ).
  3. Chalk the inner surface of the brake drum and rub with the shoe and lining assembly.
  4. Replace the shoe and lining assembly or brake drums if there are any irregular contact areas.
    NOTE: Clean off chalk after check.
    Fig 1: Checking Lining And Brake Drum Contact
    G05376242Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals