LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Basic Brake System - Lancer >> On-Vehicle Service >> BRAKE DRUM INSIDE DIAMETER CHECK < Vehicles with rear drum brake >

BRAKE DRUM INSIDE DIAMETER CHECK < Vehicles with rear drum brake >

  1. Remove the brake drum.
  2. Measure the inside diameter of the brake drum at two or more locations.

    Standard value: 203 mm (8.0 inches) 

    Limit: 205 mm (8.1 inches) 

  3. Replace the brake drums, shoe and lining assembly when wear exceeds the limit value or is badly imbalanced.
    Fig 1: Measuring Inside Diameter Of Brake Drum
    G05376284Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals