< Vehicles Without Cruise Control System >
CAUTION:
Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Check for continuity between the terminals of the switch.
| Check condition | Terminal connector of tester | Normal condition |
|---|---|---|
| At free position | 1 - 2 | Continuity exists (2 Ω or less) |
| Press the plunger from the edge of the outer case by the dimension shown in the illustration. | 1 - 2 | No continuity |