LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass - Lancer >> Rear Window Glass < Lancer > >> Liftgate Window Glass < Lancer SPORTBACK > >> Removal Service Points >> << A >> Rear Floor Wiring Harness Removal

<< A >> Rear Floor Wiring Harness Removal

  1. Cut the tape that is wrapped around the rear floor wiring harness and clip with a knife or a similar tool. Then, remove the rear floor wiring harness.
    Fig 1: Identifying Tape Cut Line
    G06472646Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Remove the rear floor wiring harness from the liftgate.
scientia non olet · About LEMON Manuals