Diagnostic Procedure
- STEP 1. Check the power window anti-trap function.
Check that the power window anti-trap function works normally. Refer to POWER WINDOW SAFETY MECHANISM CHECK < DRIVER'S SIDE ONLY > .
Q: Is the check result normal?
- YES: Go to Step 2.
- NO: Refer to DIAGNOSTIC TROUBLE CODE CHART .
- STEP 2. Check that the door window glasses are installed correctly.
Check that the door window glasses are installed correctly.
Q: Is the check result normal?
- YES: Go to Step 3.
- NO: Adjust the door window glass (Refer to DOOR WINDOW GLASS ADJUSTMENT ). Verify that the power window works normally.
- STEP 3. Retest the system.
Check that the power window does not lower while it is being raised.
Q: Is the check result normal?
- YES: No action is necessary and testing is complete.
- NO: Replace the power window motor of the defective window. Verify that the power window works normally.