Diagnostic Trouble Code Table
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, check all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE TABLE
| Diagnostic trouble code No. | Diagnostic item |
|---|---|
| L0630 | S/R Power supply |
| L0632 | S/R Switch fail |
| L0634 | S/R Sensor signal |
| L0637 | S/R Position |
| L0640 | S/R Over load |
NOTE:
S/R: Abbreviation of sunroof