Customization Function
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Dome light delay timer with door | Adjustment of interior light delay shutdown time | 0 sec | 0 second (no delay shutdown time) |
| 7.5 sec | 7.5 seconds | ||
| 15 sec | 15 seconds | ||
| 30 sec | 30 seconds (initial condition) | ||
| 60 sec | 60 seconds | ||
| 120 sec | 120 seconds | ||
| 180 sec | 180 seconds | ||
| Interior light auto cut timer | Adjustment of interior light automatic shutdown function operation time | Disable | No function |
| 3 min | 3 minutes | ||
| 30 min | 30 minutes (initial condition) | ||
| 60 min | 60 minutes |