LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Satellite Radio Tuner - Lancer >> Symptom Procedures >> Inspection Procedure 3: The error code "ANTENNA ERROR" is displayed on the display >> Diagnosis

Inspection Procedure 3: The error code "ANTENNA ERROR" is displayed on the display: Diagnosis

  1. STEP 1. Check if the antenna base or antenna rod are damaged  .

    Q: Are the antenna base or antenna rod damaged? 

    • YES:  Replace the antenna base or antenna rod.
    • NO:  Go to Step 2.
  2. STEP 2. Check the connection between the antenna base and the antenna feeder  .

    Q: Is the connection between the antenna base and the antenna feeder normal? 

    • YES:  Go to Step 3.
    • NO:  Repair the connection.
  3. STEP 3. Check if the antenna feeder is damaged  .

    Q: Is the antenna feeder damaged or bent? 

    • YES:  Repair or replace the antenna feeder.
    • NO:  Go to Step 4.
  4. STEP 4. Check the connection between the antenna feeder and the satellite radio tuner  .

    Q: Is the connection between the antenna feeder and the satellite radio tuner normal? 

    • YES:  Go to Step 5.
    • NO:  Repair the connection.
  5. STEP 5. Temporarily replace the antenna base, and check if "ANTENNA ERROR" is displayed on the display  .

    Q: Is "ANTENNA ERROR" displayed on the display? 

    • YES:  Replace the satellite radio tuner.
    • NO:  Replace the antenna base.
scientia non olet · About LEMON Manuals