LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> MITSUBISHI Multi-Communication System (MMCS) - Lancer >> Inspection >> Audio Adapter Inspection

Audio Adapter Inspection

  1. Remove the audio adapter. (Refer to AUDIO AND VIDEO ADAPTOR  )
  2. Check the continuity between terminals of audio adapter and pin jack.
    The connecting position of pin jack side circuit tester Terminal number Measurement value
    1 5 Continuity exists (2 ohms or less)
    2 4
    3 5
    4 6
    Fig 1: Checking Continuity Between Terminals Of Audio Adapter And Pin Jack
    G09630406Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals