LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> MITSUBISHI Multi-Communication System (MMCS) - Lancer >> Diagnosis >> Service Mode >> How To Initiate The Service Mode

How To Initiate The Service Mode

  1. Press "MAP" button and "SETTINGS" button at the same time for at least 3.5 seconds.
    Fig 1: Display - MAP And Settings Button
    G09630302Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. The service mode will be initiated. Then "Service" screen will be displayed.
    Fig 2: Display - Service Screen (1 Of 2)
    G09630303Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 3: Display - Service Screen (2 Of 2)
    G09630304Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals