LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Fog Light - Lancer >> On-Vehicle Service >> Bulb Replacement

Bulb Replacement

CAUTION: Don't touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.
  1. Remove the front fog light bezel and the front fog light assembly. (Refer to REMOVAL AND INSTALLATION  .)
  2. Disconnect the connector and withdraw the bulb.
  3. After replacing the bulb, securely connect the connector, and install the front fog light assembly and the front fog light bezel.
    Fig 1: Removing Front Fog Light Bezel And Front Fog Light Assembly (Except Ralliart)
    G09630136Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Removing Front Fog Light Bezel And Front Fog Light Assembly (Ralliart)
    G09630137Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals