INSPECTION PROCEDURE 8: Wind Noise Around Door: Diagnosis

STEP 1. Check the door opening weatherstrips for holding condition.
Q: Are the door opening weatherstrips holding firmly?
1. YES: Go to Step 2.
2. NO: Adjust fit of door. Refer to POWER WINDOW CHECK . Then go to Step 5.
STEP 2. Check the door opening weatherstrips for installation condition.
Q: Are the door opening weatherstrips installed correctly?
1. YES: Go to Step 3.
2. NO: Repair or replace the door opening weatherstrips. Then go to Step 5.
STEP 3. Check the clearance.
Q: Are the door glass and the door opening weatherstrips holder assembled correctly?
1. YES: Go to Step 4.
2. NO: Adjust the door glass and the door opening weatherstrips. Refer to DOOR WINDOW GLASS ADJUSTMENT . Then go to Step 5.
STEP 4. Check the door movement.
Q: Is the door deformed?
1. YES: Repair or replace the door. Then go to Step 5.
2. NO: Go to Step 5.
STEP 5. Retest the door condition.
Q: Has the wind noise been improved?
1. YES: Return to Step 1.
2. NO: The procedure is complete.