Trouble Symptom Chart

CAUTION: During diagnosis, a diagnostic trouble code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, check all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.

Trouble symptom	Inspection procedure number	Reference
Power windows do not work at all.	1	INSPECTION PROCEDURE 1: POWER WINDOWS DO NOT WORK AT ALL.
Driver's power window does not work by means of the power window main switch.	2	INSPECTION PROCEDURE 2: DRIVER'S POWER WINDOW DOES NOT WORK BY MEANS OF THE POWER WINDOW MAIN SWITCH.
Relevant power window(s) does not work by means of the front and rear passenger's power window sub switches.	3	INSPECTION PROCEDURE 3: RELEVANT POWER WINDOW(S) DOES NOT WORK BY MEANS OF THE FRONT AND REAR PASSENGER'S POWER WINDOW SUB SWITCHES.
Front and/or rear passenger's power window(s) do not work by means of the power window main switch.	4	INSPECTION PROCEDURE 4: FRONT AND/OR REAR PASSENGER'S POWER WINDOW(S) DO NOT WORK BY MEANS OF THE POWER WINDOW MAIN SWITCH.
The power window timer function does not work normally.	5	INSPECTION PROCEDURE 5: THE POWER WINDOW TIMER FUNCTION DOES NOT WORK NORMALLY.
Power window anti-trap function does not work normally. < Driver's side only >	6	INSPECTION PROCEDURE 6: POWER WINDOW ANTI-TRAP FUNCTION DOES NOT WORK NORMALLY. < DRIVER'S SIDE ONLY >
The window glass lowers automatically while it is rising. < Driver's side only >	7	INSPECTION PROCEDURE 7: THE WINDOW GLASS LOWERS AUTOMATICALLY WHILE IT IS RISING < DRIVER'S SIDE ONLY >.