Seat Belt Buckle Switch Check (Passenger's Side)

Power supply voltage: 5V 

POWER SUPPLY VOLTAGE REFERENCE CHART

Power supply connection	Check condition	Normal condition
Connect terminal No. 1 to the negative power supply (5V) terminal. Connect terminal No. 2 to the positive power supply (5V) terminal.	When the seat belt is connected	12 - 17 mA
	When the seat belt is disconnected	4 - 7 mA

Fig 1: Checking Seat Belt Buckle Switch Continuity (Passenger's Side)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.