Inspection Procedure 2: The sunshade does not open: Diagnosis

STEP 1. Connector check: E-15 sunshade switch connector
Q: Is the check result normal?
- YES: Go to Step 2.
- NO: Repair the damaged connector.
STEP 2. Sunshade switch check
Refer to SUNSHADE SWITCH CHECK .

Q: Is the sunshade switch normal?
- YES: Go to Step 3.
- NO: Replace the sunshade switch.
STEP 3. Connector check: E-11 sunshade motor assembly connector
Q: Is the check result normal?
- YES: Go to Step 4.
- NO: Repair the damaged connector.
STEP 4. Wiring harness check between E-15 sunshade switch connector terminal No. 5 and E-11 sunshade motor assembly connector terminal No. 8
- Check the input/output line for open circuit.
  Q: Is the check result normal?
  - YES: Go to Step 5.
  - NO: Repair the wiring harness.
STEP 5. Retest the system.
Check that the sunshade lid opens.

Q: Is the check result normal?
- YES: Intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION (+)
- NO: Replace the sunshade motor assembly.