LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> RVR ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Seat Assembly >> Front Seat Assembly >> Removal Service Point >> << A >> Wiring Harness Connectors Disconnection

<< A >> Wiring Harness Connectors Disconnection

Disconnect the following wiring harness connectors:

CONNECTOR REFERENCE

Connector number Connector name
D-32 (2 - yellow) Side-airbag module (squib) (LH) < Vehicles with side-airbag >
D-33 (2) Seat belt switch (Driver's side)
D-34 (2) Power seat assembly (Driver's side)
D-35 (4 - black) Heated seat (LH) < Vehicles with heated seat >
D-39 (2 - yellow) Side-airbag module (squib) (RH) < Vehicles with side-airbag >
D-40 (2 - black) Seat belt switch (Passenger's side)
D-41 (4 - black) Heated seat (RH) < Vehicles with heated seat >
Fig 1: Locating Connectors
G07049339Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
NOTE: When disconnecting the side air bag module connectors of D-32 and D-39, unlock the connector by sliding the locking button to the direction of the arrow as shown in the illustration, and then disconnect the connector.
Fig 2: Unlocking Side Air Bag Module Connector
G06473268Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.