Fuel Level Sensor Float Height

When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

Standard value:

STOPPER POSITION AND FLOAT HEIGHT

Float position	Float height mm (in)
Stopper position "F" (height A)	201.6 (7.9)
Stopper position "E" (height B)	18.0 (0.7)

Fig 1: Identifying Stopper Point F (With Height A) And Stopper Point E (With Height B)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

Standard value:

FLOAT POSITION AND FLOAT HEIGHT

Float position	Float height mm (in)
Float position	Main	Sub
Stopper position "F" (height A)	166.2 (6.5)	48.8 ± 3.0 (1.9 ± 0.1)
Stopper position "E" (height B)	38.8 (1.5)	238.0 ± 3.0 (9.3 ± 0.1)

Fig 1: Identifying Stopper Point F (With Height A) And Stopper Point E (With Height B)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.