LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Lancer DE >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All,w/Rear Disc Brakes,Both Axles1.8B
All,w/Rear Drum Brakes,Both Axles2.2B
Front or Rear,Both Sides1.0B
Rear,w/Disc Brakes,Both Sides1.0B
Rear,w/Drum Brakes,Both Sides1.4B
Combination Procedure: AXLE OR WHEEL BEARING: Replace:
FWD, Rear,One Side1.6B
Front,One Side2.2B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed System.
4-Wheel ABS, Each Additional0.2B
4-Wheel ABS, One0.7B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed System.
OneIncludes: Bleed Brakes.0.5B
Combination Procedure: CALIPER: Replace:
Includes: Bleed System.
4-Wheel ABS, OneIncludes: Bleed Brakes.0.7B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR (REMOVED): Refinish:
DOES NOT include grind hot spots.
Each Additional0.3B
One0.5B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side0.4B