LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2011 >> RVR ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Seat Assembly >> Front Seat Assembly >> Inspection < Vehicles With Heated Seat > >> Heated Seat Relay Continuity Check

Heated Seat Relay Continuity Check

SPECIFIED CONDITION

Battery voltage Tester connection Specified condition
Not applied 3 - 4 Open circuit
  • Connect terminal 2 to the positive battery terminal
  • Connect terminal 1 to the negative battery terminal
 3 - 4 Continuity exists (2Ω or less)
Fig 1: Identifying Heated Seat Relay Connector Terminals
G06473273Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals