LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Overhaul -- Lancer >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >>L<< Control Shift Retainer Gasket Installation

>>L<< Control Shift Retainer Gasket Installation

Install the control shift retainer gasket to the control shaft cover with the projection of the gasket in the illustrated position.

Fig 1: Identifying Control Shift Retainer Gasket And Gasket Projection
G06672128Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.