LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Overhaul -- Lancer >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >>I<< Synchronizer Sleeve No. 3 Installation

>>I<< Synchronizer Sleeve No. 3 Installation

Put the synchronizer sleeve No. 3 and gear shaft fork assembly No. 3 together, then install the synchronizer sleeve No. 3 in the illustrated direction.

Fig 1: Identifying Synchronizer Sleeve No. 3 Installation Direction
G06672125Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals