>>E<< 5TH Drive Gear Installation

Install special tool MB992219 until it hits the end face of the output shaft.

Fig 1: Identifying Special Tool MB992219 On End Face Of Output Shaft
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the 5th drive gear.

Fig 2: Installing 5th Drive Gear
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Set special tool MB992216 on top of the 5th drive gear.

Fig 3: Installing Special Tool MB992216 On Top Of 5th Drive Gear
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the center bolt that is included in the set of special tool MB992216 as shown.

Fig 4: Identifying Center Bolt
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Press-fit the 5th drive gear as shown.

Fig 5: Pressing 5th Drive Gear
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.