LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Overhaul -- Lancer >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>D<< Radial Ball Bearing Installation

>>D<< Radial Ball Bearing Installation

  1. Before assembly, make sure that the radial ball bearing faces the correct direction.
    Fig 1: Identifying Radial Ball Bearing Installation Direction
    G06672141Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using special tools MD998812, MD998813, MD998820 and MD998917, install the radial ball bearing.
    Fig 2: Installing Radial Ball Bearing Using Special Tools MD998812, MD998813, MD998820 And MD998917
    G06672142Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals