LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Overhaul -- Lancer >> Clutch Housing >> Disassembly And Assembly >> Assembly Service Points >> >>E<< Output Shaft Cover Installation

>>E<< Output Shaft Cover Installation

Install the output shaft cover to the clutch housing case assembly with its projections fitted in the slots in the clutch housing case assembly. Make sure that the oil hole in the output shaft cover is up as shown.

Fig 1: Identifying Oil Hole In Output Shaft Cover
G06672174Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals