Adjusting Snap Rings And Spacers
Adjustment shims (for differential side LH tapered roller bearing preload adjustment)
ADJUSTMENT SHIMS THICKNESS SPECIFICATIONS
| Thickness mm (in) | Thickness mm (in) |
|---|---|
| 1.99 - 2.01 (0.0783 - 0.0791) | 2.44 - 2.46 (0.0961 - 0.0969) |
| 2.04 - 2.06 (0.0803 - 0.0811) | 2.49 - 2.51 (0.0980 - 0.0988) |
| 2.09 - 2.11 (0.0823 - 0.0831) | 2.54 - 2.56 (0.1000 - 0.1008) |
| 2.14 - 2.16 (0.0843 - 0.0850) | 2.59 - 2.61 (0.1020 - 0.1028) |
| 2.19 - 2.21 (0.0862 - 0.0870) | 2.64 - 2.66 (0.1039 - 0.1047) |
| 2.24 - 2.26 (0.0882 - 0.0890) | 2.69 - 2.71 (0.1059 - 0.1067) |
| 2.29 - 2.31 (0.0902 - 0.0909) | 2.74 - 2.76 (0.1079 - 0.1087) |
| 2.34 - 2.36 (0.0921 - 0.0929) | 2.79 - 2.81 (0.1098 - 0.1106) |
| 2.39 - 2.41 (0.0941 - 0.0949) | 2.84 - 2.86 (0.1118 - 0.1126) |
Adjustment shims (for output shaft bearing preload adjustment)
ADJUSTMENT SHIMS THICKNESS SPECIFICATIONS
| Thickness mm (in) | Thickness mm (in) |
|---|---|
| 1.29 - 1.31 (0.0508 - 0.0516) | 1.94 - 1.96 (0.0764 - 0.0772) |
| 1.34 - 1.36 (0.0528 - 0.0535) | 1.99 - 2.01 (0.0783 - 0.0791) |
| 1.39 - 1.41 (0.0547 - 0.0555) | 2.04 - 2.06 (0.0803 - 0.0811) |
| 1.44 - 1.46 (0.0567 - 0.0575) | 2.09 - 2.11 (0.0823 - 0.0831) |
| 1.49 - 1.51 (0.0587 - 0.0594) | 2.14 - 2.16 (0.0843 - 0.0850) |
| 1.54 - 1.56 (0.0606 - 0.0614) | 2.19 - 2.21 (0.0862 - 0.0870) |
| 1.59 - 1.61 (0.0626 - 0.0634) | 2.24 - 2.26 (0.0882 - 0.0890) |
| 1.64 - 1.66 (0.0646 - 0.0654) | 2.29 - 2.31 (0.0902 - 0.0909) |
| 1.69 - 1.71 (0.0665 - 0.0673) | 2.34 - 2.36 (0.0921 - 0.0929) |
| 1.74 - 1.76 (0.0685 - 0.0693) | 2.39 - 2.41 (0.0941 - 0.0949) |
| 1.79 - 1.81 (0.0705 - 0.0713) | 2.44 - 2.46 (0.0961 - 0.0969) |
| 1.84 - 1.86 (0.0724 - 0.0732) | 2.49 - 2.51 (0.0980 - 0.0988) |
| 1.89 - 1.91 (0.0744 - 0.0752) |
Shaft snap rings (for input shaft synchronizer hub No. 3 bushing end play adjustment)
SHAFT SNAP RINGS THICKNESS SPECIFICATIONS
| Thickness mm (in) | Thickness mm (in) |
|---|---|
| 1.75 - 1.80 (0.0689 - 0.0709) | 2.00 - 2.05 (0.0787 - 0.0807) |
| 1.80 - 1.85 (0.0709 - 0.0728) | 2.05 - 2.10 (0.0807 - 0.0827) |
| 1.85 - 1.90 (0.0728 - 0.0748) | 2.10 - 2.15 (0.0827 - 0.0846) |
| 1.90 - 1.95 (0.0748 - 0.0768) | 2.15 - 2.20 (0.0846 - 0.0866) |
| 1.95 - 2.00 (0.0768 - 0.0787) |