LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment- Lancer >> Stabilizer Bar >> Removal And Installation >> Installation Service Points >> >>C<< Stabilizer Link And Strut Connection Nut/Stabilizer Link And Stabilizer Bar Connection Nut Installation

>>C<< Stabilizer Link And Strut Connection Nut/Stabilizer Link And Stabilizer Bar Connection Nut Installation

Use a hexagon wrench to install the stabilizer link and strut connection nut as shown in the illustration.

Fig 1: Identifying Stabilizer Link And Strut Connection Nut
G06672777Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals