Lower Arm Rear Bushing Replacement

Required Special Tools: 

• MB992119: Arm bushing remover and installer
• MB990979: Ring
• MB990890: Rear suspension bushing base

  Replace the back side bushing according to the following procedure.

  Fig 1: Identifying Lower Arm Rear Bushing

  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

1. Use special tools MB992119, MB990979 and MB990890 to remove the bushing.
   Fig 2: Removing Bushing

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Use special tools MB992119, MB990979 and MB990890 to press-fit the bushing.
3. Press-fit the bushing so that the bushing protrusion is in the direction shown in the illustration.
4. Press-fit the bushing until the special tool contacts with the lower arm assembly.
   Fig 3: Pressing Bushing

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.