LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Steering >> Steering Gear >> Power Steering -- Lancer >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >>A<< Tie-Rod Installation

>>A<< Tie-Rod Installation

CAUTION: Do not tighten the vise strongly in order not to damage the rack bar.
  1. Wrap rack bar with cloth in order not to damage, and tix the rack bar with a vise.
  2. Use special tool variable spanner (MB992249) to tighten the tie-rod to the specified torque.

    Tightening torque: 89 ± 9 N.m 

    Fig 1: Wraping Rack Bar With Cloth
    G06673030Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals