LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Steering >> Steering Gear >> Power Steering -- Lancer >> Power Steering Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE 10: Oil Leakage from Hose Connection >> Diagnosis

INSPECTION PROCEDURE 10: Oil Leakage from Hose Connection: Diagnosis

  1. STEP 1. Check for loosening of the return tube flare nut. 

    Q: Is the flare nut loose? 

    • YES:  Tighten it to standard value (Refer to POWER STEERING HOSES  ). Then go to Step  3.
    • NO:  Go to Step 2.
  2. STEP 2. Check the hose connection and the clamp installation. 

    Q: Are they correct? 

    • YES:  Go to Step 3.
    • NO:  Repair or replace the part (Refer to POWER STEERING HOSES  ). Then go to Step 3.
  3. STEP 3. Retest the system. 

    Check that no oil is leaking.

    Q: Is there oil leakage? 

    • YES:  Repeat from Step  1.
    • NO:  The procedure is complete.
scientia non olet · About LEMON Manuals