LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (SRS) -- Lancer >> SRS Air Bag Diagnosis >> Data List Reference Table >> Data List Output

Data List Output

The following items can be read by the scan tool from the SRS-ECU input data.

DATA LIST

Item No. Display on M.U.T.-III Check conditions Normal conditions
01 SRS warning light "ON" request
  • Ignition switch: ON
  • After warning lamp pre-check
 OFF
  • Ignition switch: ON
  • During warning lamp pre-check
 ON
02 Pass. SRS light "ON" request
  • Ignition switch: ON
  • After warning light pre-check
 OFF
  • Ignition switch: ON
  • During warning light pre-check
 ON
04 Passenger's seatbelt switch
  • Ignition switch: ON
  • After warning light pre-check
  • Wear the passenger seatbelt.
 Fastened
  • Ignition switch: ON
  • After warning light pre-check
  • Undo the passenger seatbelt.
 Unfastened
05 Passenger seat airbag ignition
  • Ignition switch: ON
  • After warning light pre-check
  • Apply a load to the passenger seat.
 Permission
  • Ignition switch: ON
  • After warning light pre-check
  • Undo a load from a passenger seat.
 Prohibition

The following items can be read by the scan tool from the occupant classification-ECU input data.

DATA LIST

Item No. Display on M.U.T.-III Check conditions Normal conditions
01 Passenger weight Apply a load to the passenger seat. -2048 Kg (4515 lb) to 2048 Kg (4515 lb)
02 Dr seat position sensor current Slide the seat the back-end to the front-position. 0 to 1,700 mA
03 Dr seat position sensor voltage Slide the seat the back-end to the front-position. 0 to 5,000 mV
07 Dr seat position sensor status Slide the seat the back-end to the front-position. Not Frontal Zone/Frontal Zone/Undetermined/No Dr STPS/No Pa STPS/Seat sensor DTC
08 occupant classification status Apply a load to the passenger seat. Empty/RFIS(1)/Child/More 5th%/Less 5th%/Undermined
10 Battery voltage Always 6.5 to 16 V
21 Pa seat weight sensor 1 RR Apply a load to the passenger seat. -2048 Kg (4515 lb) to 2048 Kg (4515 lb)
22 Pa seat weight sensor 1 RR volt Apply a load to the passenger seat. 0 to 5,000 mV
23 Pa seat weight sensor 2 RF Apply a load to the passenger seat. -2048 Kg (4515 lb) to 2048 Kg (4515 lb)
24 Pa seat weight sensor 2 RF volt Apply a load to the passenger seat. 0 to 5,000 mV
25 Pa seat weight sensor 3 LF Apply a load to the passenger seat. -2048 Kg (4515 lb) to 2048 Kg (4515 lb)
26 Pa seat weight sensor 3 LF volt Apply a load to the passenger seat. 0 to 5,000 mV
27 Pa seat weight sensor 4 LR Apply a load to the passenger seat. -2048 Kg (4515 lb) to 2048 Kg (4515 lb)
28 Pa seat weight sensor 4 LR volt Apply a load to the passenger seat. 0 to 5,000 mV
30 VIN Information Always -
(1) Radio Frequency Integrated Circuit
scientia non olet · About LEMON Manuals