LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (SRS) -- Lancer >> Post-Collision Diagnosis >> Repair Procedure >> Clock Spring

Clock Spring

  1. Check the clock spring connectors and protective tube for damage, and the terminals for deformation.
  2. Visually check the case for damage.
  3. Check for continuity between the connectors (Refer to >>E<< POST-INSTALLATION INSPECTION  ) <Except RALLIART>, (Refer to INSPECTION  ) <RALLIART>
    Fig 1: Identifying Protective Tubes
    G06669225Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals