LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Maintenance >> Schedule >> General Information - Lancer >> Maintenance Service (2.0L Engine Turbo) >> 22. Rear Axle Oil (With LSD) (Change)

22. Rear Axle Oil (With LSD) (Change)

  1. Remove the filler plug.
  2. Remove the drain plug and drain oil.
  3. Tighten the drain plug to the specified torque.

    Tightening torque: 64 ± 4 N.m (47 ± 2 ft-lb) 

  4. Add the oil until the level comes to the lower portion of the filler plug hole.

    Specified gear oil: MITSUBISHI Genuine DIA QUEEN LSD gear oil 

  5. Tighten the filler plug to the specified torque.

    Tightening torque: 49 ± 9 N.m (36 ± 6 ft-lb)