LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Overhaul <2.4L> - Lancer) >> Generator And Ignition System >> Removal And Installation >> Installation Service Points >> >>A<< Spark Plug Installation

>>A<< Spark Plug Installation

WARNING: This page is about a different variant/trim than selected.

Use special tool MB991398, tighten the spark plug to specified tightening torque.

Tightening torque: 25 ± 5 N.m (18 ± 3 ft-lb) 

Fig 1: Tightening Spark Plug Using Special Tool MB991398
G06665260Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.