Valve Tappet

WARNING: This page is about a different variant/trim than selected.

Check the thickness stamp.

Fig 1: Identifying Thickness Stamp
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

If the measured value in the table value is not in agreement with the value in the table to the thickness stamp, replace the valve tappet.

There are 47 kinds of valve tappets at intervals of 0.015 mm (0.0006 inch) in the range between 3.000 (0.1181 inch) and 3.690 mm (0.1453 inch).

Fig 2: Measuring Thickness Of Removed Valve Tappet

G06665336

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

STAMP THICKNESS CHART

Thickness mm (in)	Thickness stamp
3.000 (0.1181)	3.000
3.015 (0.1187)	3.015
3.030 (0.1193)	3.030
3.045 (0.1199)	3.045
3.060 (0.1205)	3.060
3.075 (0.1211)	3.075
3.090 (0.1217)	3.090
3.105 (0.1222)	3.105
3.120 (0.1228)	3.120
3.135 (0.1234)	3.135
3.150 (0.1240)	3.150
3.165 (0.1246)	3.165
3.180 (0.1252)	3.180
3.195 (0.1258)	3.195
3.210 (0.1264)	3.210
3.225 (0.1270)	3.225
3.240 (0.1276)	3.240
3.255 (0.1281)	3.255
3.270 (0.1287)	3.270
3.285 (0.1293)	3.285
3.300 (0.1299)	3.300
3.315 (0.1305)	3.315
3.330 (0.1311)	3.330
3.345 (0.1317)	3.345
3.360 (0.1323)	3.360
3.375 (0.1329)	3.375
3.390 (0.1335)	3.390
3.405 (0.1341)	3.405
3.420 (0.1346)	3.420
3.435 (0.1352)	3.435
3.450 (0.1358)	3.450
3.465 (0.1364)	3.465
3.480 (0.1370)	3.480
3.495 (0.1376)	3.495
3.510 (0.1382)	3.510
3.525 (0.1388)	3.525
3.540 (0.1394)	3.540
3.555 (0.1400)	3.555
3.570 (0.1406)	3.570
3.585 (0.1411)	3.585
3.600 (0.1417)	3.600
3.615 (0.1423)	3.615
3.630 (0.1429)	3.630
3.645 (0.1435)	3.645
3.660 (0.1441)	3.660
3.675 (0.1447)	3.675
3.690 (0.1453)	3.690