LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (Theft Alarm System - Lancer Evolution) >> Inspection >> Theft-Alarm Indicator Check

Theft-Alarm Indicator Check

WARNING: This page is about a different variant/trim than selected.
  1. Remove the center panel.
  2. Connect the battery (+) terminal with the center panel connector (terminal No. 15). Then, check if the theft-alarm indicator is illuminated when the battery (-) terminal and the center panel connector (terminal No. 12) are connected.
  3. If the theft-alarm indicator is illuminated, it is judged good.
    NOTE: Make sure that the polarity is correct.
    Fig 1: Identifying Center Panel Unit Connector Terminal
    G05385385Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.