INSPECTION PROCEDURE 2: Uneven Body Clearance: Diagnosis
WARNING: This page is about a different variant/trim than selected.
- STEP 1. Check the clearance around the trunk lid..
Q: Are the apertures between the trunk lid and the adjacent body panels aligned correctly?
- YES: Then go to Step 2.
- NO: Adjust the trunk lid panel assembly. Refer to ADJUSTMENT OF CLEARANCE AROUND TRUNK LID .
- STEP 2. Retest the system.
Q: Are the clearances between the body panels even?
- YES: The procedure is complete.
- NO: Return to Step 1.