LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 46 (Sunroof -- Lancer Evolution) >> Sunroof >> Disassembly And Assembly >> Installation Service Points >> >>A<< Sunroof Drip Plate And Sunroof Lid Slide Guide Installation

>>A<< Sunroof Drip Plate And Sunroof Lid Slide Guide Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the sunroof drip plate and sunroof lid slide guide to the sunroof housing.
  2. Push the sunroof drip plate and sunroof lid slide guide toward the front of sunroof housing until they stop.
    CAUTION: If the slide part of the sunroof lid slide guide is positioned incorrectly, the sunroof may not work normally.
  3. Push the slide part of the sunroof lid slide guide forward. Align the pin center of the slide part with the location shown in the illustration.
    Fig 1: Identifying Sunroof Lid Slide Guide
    G05395023Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.