Sunroof Motor Assembly Terminal Check
WARNING: This page is about a different variant/trim than selected.
TERMINAL REFERENCE
| Terminal number | Check items | Check conditions | Normal conditions |
|---|---|---|---|
| 1 | Ground | Always | 1 V or less |
| 2 | Ground | Always | 1 V or less |
| 3 | Battery power supply | Ignition switch: ON | Battery positive voltage |
| 4 | Input from sunroof switch (tilt-up) | Sunroof switch: Up | 1 V or less |
| 5 | Input from sunroof switch (open) | Sunroof switch: Open | 1 V or less |
| 6 | Battery power supply | Always | Battery positive voltage |
| 7 | LIN communication line (between ETACS-ECU) | Always | 0 to 12 V (pulse signal) |
| 8 | - | - | - |
| 9 | - | - | - |
| 10 | Input from sunroof switch (close or down) | Sunroof switch: Close or down | 1 V or less |