INSPECTION PROCEDURE 8: Wind Noise Around Door: Diagnosis

WARNING: This page is about a different variant/trim than selected.

STEP 1. Check the weatherstrip for holding condition.
Q: Is the weatherstrip holding firmly?
- YES: Go to Step 2.
- NO: Adjust fit of door. Refer to DOOR WINDOW GLASS ADJUSTMENT . Then go to Step 5.
STEP 2. Check the weatherstrip for installation condition.
Q: Is the weatherstrip for installed properly?
- YES: Go to Step 3.
- NO: Repair or replace the weatherstrip. Then go to Step 5.
STEP 3. Check the clearance.
Q: Are the door glass and the door weatherstrip holder assembled correctly?
- YES: Go to Step 4.
- NO: Adjust the door glass and the door weatherstrip. Refer to DOOR WINDOW GLASS ADJUSTMENT . Then go to Step 5.
STEP 4. Check the door.
Q: Is the door deformed?
- YES: Repair or replace the door. then go to Step 5.
- NO: Go to Step 5.
STEP 5. Retest the system.
Q: Has the wind noise been improved?
- YES: Return to Step 1.
- NO: This diagnosis complete.