LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (Hood -- Lancer Evolution) >> On-Vehicle Service >> Adjustment Of Clearance Around Hood

Adjustment Of Clearance Around Hood

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the hood hinge mounting bolts but do not remove them. Move the hood hinge back/forth and left/right to align the hood level.
  2. After the adjustment, tighten the hood hinge mounting bolts to 12 ± 2 N.m (102 ± 22 in-lb).
    Fig 1: Adjustment Of Clearance Around Hood
    G05394827Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals