LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (Front Suspension & Wheel Alignment - Lancer Evolution) >> On-Vehicle Service >> Ball Joint Dust Cover Check >> Lower Arm Ball Joint Dust Cover Check

Lower Arm Ball Joint Dust Cover Check

WARNING: This page is about a different variant/trim than selected.
  1. Using your fingers, press the dust cover to check for a crack or damage.
  2. If there is a crack or damage on the dust cover, replace the lower arm assembly. (Refer to LOWER ARM  .)
    NOTE: The crack or damage on the dust cover may damage the ball joint.
    If the dust cover is damaged during maintenance, replace the dust cover. (Refer to LOWER ARM BALL JOINT DUST COVER REPLACEMENT  .)
scientia non olet · About LEMON Manuals