INSPECTION PROCEDURE 2: Excessive Body Rolling: Diagnosis
WARNING: This page is about a different variant/trim than selected.
- STEP 1. Check for broken or deteriorated stabilizer bar.
Q: Is the stabilizer bar in good condition?
- YES: Go to Step 2.
- NO: Replace it (Refer to REMOVAL AND INSTALLATION ), then go to Step 3.
- STEP 2. Check the strut assembly for damage.
Q: Is the strut assembly in good condition?
- YES: Go to Step 3.
- NO: Replace it (Refer to REMOVAL AND INSTALLATION ), then go to Step 3.
- STEP 3. Retest the system.
Q: Is the malfunction eliminated?
- YES: The procedure is complete.
- NO: Return to Step 1.